GE Advanced Access Network Switches H3C S5130S-28S-HPWR-EI Series

GE Advanced Access Network Switches H3C S5130S-28S-HPWR-EI Series

The S5130S-EI H3C Series switches provide simple (integrated power supply), low-cost, and easy-to-deploy POE+ switched access network solutions that offer advanced security features, High-density GE and 10GbE backbone interfaces, static routes, RIP, OSPF, SDN and IRF support, and flexible management capabilities to meet all SMB access network requirements, large enterprise desktop connectivity requirements, and group access network requirements buildings with high port density.

H3C’s S5130S-EI series of Ethernet switches includes the following models:

S5130S-10P-EI: 8 Ethernet 10/100/1000BASE-T ports, 2 SFP 1G ports;

S5130S-10MS-UPWR-EI: 8 ports 1G/2.5GBase-T(UPoE) and 2 ports SFP+ 10G/1G Base-X;

S5130S -12TP-EI: 8 10/100/1000BASE-T Ethernet ports, 4 1G SFP ports (2 combo ports);

S5130S-16S-PWR -EI: 12 10/100/1000Base-T ports with PoE+ support, 2 10/100/1000Base-T ports and 2 SFP+ 10G/1GBase-X ports;

S5130S-20P-EI: 16 Ethernet 10/100/1000BASE-T ports, 4 SFP 1G ports;

S5130S-28P-EI : 24 Ethernet 10/100/1000BASE-T ports, 4 SFP 1G ports;

S5130S-28PS-EI: 24 Ethernet 10/100/1000BASE ports -T (8 combined ports), 4 SFP+ 10G BASE-X ports;

S5130S-52P-EI: 48 10/100/1000BASE Ethernet ports T, 4 SFP 1G ports;

S5130S-28TP-EI: 24 Ethernet 10/100/1000BASE-T ports, 4 SFP 1G ports (2 combined port);

S5130S-52TP-EI: 48 Ethernet 10/100/1000BASE-T ports, 4 SFP 1G ports (2 combined ports);< /p>

S5130S-28S-EI: 24 Ethernet 10/100/1000BASE-T ports, 4 SFP+ 10G/1G BASE-X ports;

n

S5130S-52S-EI: 48 Ethernet 10/100/1000BASE-T ports, 4 SFP+ 10G/1G BASE-X ports;

S5130S-28ST-EI: 24 10/100/1000Base-T ports, 2 SFP+ 10G BASE-X ports and 2 1/2.5/5/10G BASE-T ports;

S5130S-52ST-EI: 48 10/100/1000Base-T ports, 2 SFP+ 10G BASE-X ports and 2 1/2.5/5/10G BASE ports -T;

S5130S-28F-EI: 24 SFP 1G ports (8 combined ports), 4 SFP+ 10G/1G BASE-X ports;

S5130S-52F-EI: 48 SFP 1G ports (2 combined ports), 4 SFP+ 10G/1G BASE-X ports;

S5130S -10P-HPWR-EI: 8 Ethernet 10/100/1000BASE-T ports, 2 SFP 1G ports;

S5130S-12TP-HPWR-EI: 8 Ethernet 10/100/1000BASE-T ports, 4 SFP 1G ports (2 combined ports);

S5130S-20P-PWR-EI: 16 ports Ethernet 10/100/1000BASE-T, 4 SFP 1G ports;

S5130S-28P-PWR-EI: 24 Ethernet 10/100/1000BASE-ports T, 4 SFP 1G ports;

S5130S-28P-HPWR-EI: 24 10/100/1000BASE-T Ethernet ports, 4 SFP 1G ports ( combined);

S5130S-52P-PWR-EI: 48 Ethernet 10/100/1000BASE-T ports, 4 SFP 1G ports;

S5130S-28S-PWR-EI: 24 Ethernet 10/100/1000BASE-T ports, 4 SFP+ 10G/1G BASE-X ports;

S5130S-28S-HPWR-EI: 24 10/100/1000BASE-T Ethernet ports (4 combo ports), 4 SFP+ 10G/1G BASE-X ports;

S5130S-28ST-PWR-EI: 24 10/100/1000Base-T ports, 2 SFP+ 10G BASE-X ports and 2 1/2.5/5/ ports 10G BASE-T;

S5130S-52S-PWR-EI: 48 10/100/1000BASE-T Ethernet ports, 4 SFP+ 10G/1G BASE ports -X;

S5130S-52ST-PWR-EI: 48 10/100/1000Base-T ports, 2 SFP+ 10G BASE-X ports and 2 1/2.5/5/10G BASE-T;

S5130S-52MP-EI: 48 10/100/1000BASE-T ports, 2 SFP 100 ports /1000 BASE-X and 2 ports 1/2.5/5GBASE-T;

S5130S-28MP-EI: 24 ports 10/100/1000BASE-T , 2 SFP 100/1000 BASE-X ports and 2 1/2.5/5GBASE-T ports;

S5130S-28MP-HPWR-EI: 24 ports 10/100/1000BASE-T (with PoE+ support), 2 SFP 100/1000 BASE-X ports and 2 1/2.5/5GBASE-T ports

400;”>S5130S-52P-PWR-EI: 48 Ethernet 10/100/1000BASE-T ports, 4 SFP 1G ports;

S5130S-28S -PWR-EI: 24 Ethernet 10/100/1000BASE-T ports, 4 SFP+ 10G/1G BASE-X ports;

S5130S-28S-HPWR -EI: 24 Ethernet 10/100/1000BASE-T ports (4 combined ports), 4 SFP+ 10G/1G BASE-X ports;

S5130S- 28ST-PWR-EI: 24 10/100/1000Base-T ports, 2 SFP+ 10G BASE-X ports and 2 1/2.5/5/10G BASE-T ports;

S5130S-52S-PWR-EI: 48 Ethernet 10/100/1000BASE-T ports, 4 SFP+ 10G/1G BASE-X ports;

S5130S-52ST-PWR-EI: 48 10/100/1000Base-T ports, 2 SFP+ 10G BASE-X ports and 2 1/2.5/5/10G BASE-T ports;

< p style="font-weight: 400;">S5130S-52MP-EI: 48 10/100/1000BASE-T ports, 2 100/1000 BASE-X SFP ports and 2 1/2.5/5GBASE-T ports;

S5130S-28MP-EI: 24 10/100/1000BASE-T ports, 2 SFP 100/1000 BASE-X ports and 2 1/2.5/5GBASE ports -T;

S5130S-28MP-HPWR-EI: 24 ports 10/100/1000BASE-T (with PoE+ support), 2 SFP 100 ports 1000 BASE-X and 2 ports 1/2.5/5GBASE-T

400;”>S5130S-52P-PWR-EI: 48 Ethernet 10/100/1000BASE-T ports, 4 SFP 1G ports;

S5130S-28S -PWR-EI: 24 Ethernet 10/100/1000BASE-T ports, 4 SFP+ 10G/1G BASE-X ports;

S5130S-28S-HPWR -EI: 24 Ethernet 10/100/1000BASE-T ports (4 combined ports), 4 SFP+ 10G/1G BASE-X ports;

S5130S- 28ST-PWR-EI: 24 10/100/1000Base-T ports, 2 SFP+ 10G BASE-X ports and 2 1/2.5/5/10G BASE-T ports;

S5130S-52S-PWR-EI: 48 Ethernet 10/100/1000BASE-T ports, 4 SFP+ 10G/1G BASE-X ports;

S5130S-52ST-PWR-EI: 48 10/100/1000Base-T ports, 2 SFP+ 10G BASE-X ports and 2 1/2.5/5/10G BASE-T ports;

< p style="font-weight: 400;">S5130S-52MP-EI: 48 10/100/1000BASE-T ports, 2 100/1000 BASE-X SFP ports and 2 1/2.5/5GBASE-T ports;

S5130S-28MP-EI: 24 10/100/1000BASE-T ports, 2 SFP 100/1000 BASE-X ports and 2 1/2.5/5GBASE ports -T;

S5130S-28MP-HPWR-EI: 24 ports 10/100/1000BASE-T (with PoE+ support), 2 SFP 100 ports 1000 BASE-X and 2 ports 1/2.5/5GBASE-T

Software Defined Networking (SDN)

Software Defined Networking (SDN) is an innovative network architecture that simplifies network management and eliminates maintenance complexity by separating the network management layer from the network data forwarding layer via Openflow. But more importantly, they provide flexible flow control mechanisms and provide a clear platform for core networking applications and innovative solutions.

The S5130S-EI series switches support a voluminous table of data flows on the network. Combined with H3C’s SDN Controller, they allow you to easily implement a two-tier network architecture and quickly add new features to existing networks to radically simplify network management while significantly reducing maintenance costs.

Intelligent technology IRF2 fault-tolerant architecture

H3C’s S5130S-EI series switches implement Intelligent Resilient Framework 2 (IRF2) technology. IRF2 provides the following benefits:

Excellent scalability: With IRF2, device aggregation can be plug-and-play by simply adding one or more switches to the stack IRF2 and enabling IRF2 stacking mode on the new device. New devices can be managed through a single shared IP address, allowing software updates to be carried out simultaneously on all devices to reduce network expansion costs.

High reliability: patented IRF2’s 1:N redundancy technology allows each of the slaves in the IRF2 stack to serve as a backup for the master, providing control plane redundancy and data link redundancy, as well as uninterrupted Layer 3 forwarding. This improves reliability and helps avoid interruptions at work and generally improve productivity. If the primary device fails, traffic does not stop.

Load balancing: IRF2 supports aggregation of connections across multiple devices. Connections to upstream and downstream systems can be made through multiple physical links, creating another layer of redundancy and increasing network resource utilization.

Availability: IRF2 technology implemented H3C via standard 40 Gigabit Ethernet (40GE) or 10 Gigabit Ethernet (10GE) ports and provides bandwidth allocation for service traffic and application access, with intelligent separation of local traffic and traffic to higher-level systems. IRF2 rules can be applied not only at the scale of one rack or adjacent racks, but also at the scale of the entire local network.

Intelligent Management Center (SmartMC)

SmartMC is H3C’s latest, innovative solution that helps small and medium-sized businesses manage their network management challenges with a free, easy-to-use, web-based tool. SmartMC is an on-switch management tool found in management switches and other access network switches. SmartMC has the following advantages:

Intelligent Operation: After powering up the switch and activating the SmartMC function, the topology is automatically built, which is displayed to the user in a rich graphical web interface for check the current status.

Centralized management: All management operations can be performed through the management switch, including centralized configuration backup and software versioning for increased efficiency.< /p>

One-click device replacement: If one of the switches fails, a new replacement switch of the same type can be automatically loaded with the same configuration so that it can immediately began to work similarly to the previous one.

Comprehensive security features

In series switches H3C’s S5130S-EI implements an innovative single-port multiple authentication feature, meaning the authentication modes for access may differ for different clients. For example, some clients are only capable of MAC address authentication (such as printers), some user nodes use 802.1X authentication, and some user nodes can only authenticate access using a web portal. To flexibly adapt to different network authentication requirements, the S5130S-EI series switches support multiple authentication on a single port for a unified deployment.

The series switches The S5130S-EI supports SSH V2 (Secure Shell V2) technology to ensure information security, as well as strong authentication tools to protect the Ethernet switch from attacks such as IP address spoofing or interception of unencrypted information.

The main threats to network security are ARP attacks and ARP virus hijacking, so the S5130S-EI series switches provide various ARP security mechanisms, such as ARP discovery to verify client eligibility, ARP packet authentication , and configure ARP rate limiting to prevent ARP flood attacks targeting device processors.

H3C’s S5130S-EI series switches support EAD (End User Admission Domination) security checks: Together with the iMC (intelligent Management Center) management system, the EAD function allows you to combine end device security policies, such as antivirus and the latest updates, with network access control mechanisms and access rights control policies by verifying, isolating, updating, managing and monitoring endpoint access, EAD enables you to move from passive, targeted network security to active, end-to-end security, and from isolated to centralized management, which expands the network’s capabilities to counter viruses, worms and new threats.

High availability

In the S5130S-series switches EI provides various device-level and channel-level redundancy features, supporting overcurrent and surge protection, overheat protection, power supply and fan fault detection with alarm generation, and fan speed adjustment based on temperature changes. In addition, the S5130S-52F-EI switch features two hot-swappable AC/DC power supplies.

In addition to device-level redundancy, the switches The S5130S-EI series supports various link-level redundancy capabilities, such as LACP/STP/RSTP/MSTP/Smart Link protocols. Devices in this series support IRF2 technology and 1:N redundancy, as well as link aggregation across different devices, which significantly increases network reliability.

Extensive quality of service (QoS) management capabilities

S5130S-EI series switches support packet filtering at layers 2 to 4, as well as traffic classification based on source MAC address, destination MAC address, IP address source, destination IP address, TCP/UDP port numbers, protocol type and VLAN. They provide flexible port- and queue-based queuing algorithms, including Strict Priority (SP), Weighted Round Robin (WRR), and SP+WRR. The S5130S-EI series switches allow you to control the guaranteed access rate (CAR) with a minimum step of 8 kbps. The devices support port mirroring for incoming and outgoing traffic to monitor packets on specific ports, as well as packet mirroring per monitoring port for network troubleshooting.

Professional lightning protection

Professional lightning protection

h2>

The S5130S-EI Series switches feature built-in lightning protection technology that provides industry-leading 10 kV surge protection to ports, significantly reducing the incidence of equipment damage due to surges lightning.

Superior management capabilities

H3C’s S5130S-EI series switches provide all the features to simplify management with SNMPv1/v2/v3 support, which allows management using platforms such as Open View and iMC. Support for switch management via CLI and Telnet further simplifies tasks. The use of SSH 2.0 encryption provides additional security for the switch control channel.

Eco-friendly design

The S5130S-EI series switches feature Various power saving features, including automatically turning off power to the interface (automatic power saving at the port level) if the interface remains inactive for a certain period of time, after which the system automatically puts it into power saving mode. In addition, the devices support Energy Efficient Ethernet (EEE) technology, which puts ports into a power-saving mode if they are inactive for a certain period of time. In addition, the S5130S-EI series switches meet all key environmental protection and safety requirements of the EU RoHS standard.

8-port switch models (S5130S-10P -EI, S5130S-12TP-EI, S5130S-10P-HPWR-EI and S5130S-12TP-HPWR-EI) and 24-port switch models (S5130S-28P-EI) of the S5130S-EI series are fanless, which significantly reduces power consumption and noise level from devices.

which provides industry-leading 10 kV protection for ports, significantly reducing the incidence of lightning damage to equipment.

Excellent control capabilities

H3C’s S5130S-EI Series switches provide simplified management capabilities with SNMPv1/v2/v3 support, enabling management using platforms such as Open View and iMC. Support for switch management via CLI and Telnet further simplifies tasks. The use of SSH 2.0 encryption provides additional security for the switch control channel.

Eco-friendly design

The S5130S-EI series switches feature Various power saving features, including automatically turning off power to the interface (automatic power saving at the port level) if the interface remains inactive for a certain period of time, after which the system automatically puts it into power saving mode. In addition, the devices support Energy Efficient Ethernet (EEE) technology, which puts ports into a power-saving mode if they are inactive for a certain period of time. In addition, the S5130S-EI series switches meet all key environmental protection and safety requirements of the EU RoHS standard.

8-port switch models (S5130S-10P -EI, S5130S-12TP-EI, S5130S-10P-HPWR-EI and S5130S-12TP-HPWR-EI) and 24-port switch models (S5130S-28P-EI) of the S5130S-EI series are fanless, which significantly reduces power consumption and noise level from devices.

which provides industry-leading 10 kV protection for ports, significantly reducing the incidence of lightning damage to equipment.

Excellent control capabilities

H3C’s S5130S-EI Series switches provide simplified management capabilities with SNMPv1/v2/v3 support, enabling management using platforms such as Open View and iMC. Support for switch management via CLI and Telnet further simplifies tasks. The use of SSH 2.0 encryption provides additional security for the switch control channel.

Eco-friendly design

The S5130S-EI series switches feature Various power saving features, including automatically turning off power to the interface (automatic power saving at the port level) if the interface remains inactive for a certain period of time, after which the system automatically puts it into power saving mode. In addition, the devices support Energy Efficient Ethernet (EEE) technology, which puts ports into a power-saving mode if they are inactive for a certain period of time. In addition, the S5130S-EI series switches meet all key environmental protection and safety requirements of the EU RoHS standard.

8-port switch models (S5130S-10P -EI, S5130S-12TP-EI, S5130S-10P-HPWR-EI and S5130S-12TP-HPWR-EI) and 24-port switch models (S5130S-28P-EI) of the S5130S-EI series are fanless, which significantly reduces power consumption and noise level from devices.

after which the system automatically switches it to energy saving mode. In addition, the devices support Energy Efficient Ethernet (EEE) technology, which puts ports into a power-saving mode if they are inactive for a certain period of time. In addition, the S5130S-EI series switches meet all key environmental protection and safety requirements of the EU RoHS standard.

8-port switch models (S5130S-10P -EI, S5130S-12TP-EI, S5130S-10P-HPWR-EI and S5130S-12TP-HPWR-EI) and 24-port switch models (S5130S-28P-EI) of the S5130S-EI series are fanless, which significantly reduces power consumption and noise level from devices.

after which the system automatically switches it to energy saving mode. In addition, the devices support Energy Efficient Ethernet (EEE) technology, which puts ports into a power-saving mode if they are inactive for a certain period of time. In addition, the S5130S-EI series switches meet all key environmental protection and safety requirements of the EU RoHS standard.

8-port switch models (S5130S-10P -EI, S5130S-12TP-EI, S5130S-10P-HPWR-EI and S5130S-12TP-HPWR-EI) and 24-port switch models (S5130S-28P-EI) of the S5130S-EI series are fanless, which significantly reduces power consumption and noise level from devices.

Brand

H3C

Additional information

Weight 7 kg
Switching capacity of ports

128 Gbps

Device switching capacity

336 Gbps

Forwarding performance

96 million packets/s

10/100/1000Base-T ports

24

SFP ports

4

Max. stacking throughput

80 Gbps

Max. devices in a stack

9

Input voltage

AC power supply current: Nominal input voltage range: 100 .. 240 V AC. current, 50/60 Hz, DC power supply. current: Nominal input voltage range -48 .. -60 V (for S5130S-28F-EI, S5130S-52F-EI with PSR150-D1), DC power supply. current: Nominal input voltage range -54 .. -57 V DC. current (for S5130S-52P-PWR-EI, S5130S-28P-HPWR-EI, S5130S-28S-HPWR-EI, S5130S-52S-PWR-EI with RPS1600-A)

Flash/SDRAM

256 MB/512 MB

Working temperature

-5°C . .. 50°C (temperature under normal operating conditions), -5°C .. 40°C (when using transceivers with a maximum communication range ≥ 80 km), -5°C .. 45°C (using transceivers with a maximum communication range < 80 km), Altitude at sea level -60 m .. 5000 m: From 0 m altitude, the maximum operating temperature decreases by 0.33°C for every 100 m increase in altitude.

Storage temperature

-40°C .. 70°C

The page is under development

This section is under development.

We apologize for the temporary inconvenience

Let call
Please enable JavaScript in your browser to complete this form.