GE Access Network Switches with 10G Backbone Interfaces H3C S5130S-52S-LI Series

GE Access Network Switches with 10G Backbone Interfaces H3C S5130S-52S-LI Series

Part of H3C’s S5130S-LI line of Gigabit Ethernet Layer 2 switches, it is the second generation of intelligent managed switches designed for networks that require high performance, port density, backbone throughput and ease of operation.

H3C’s S5130S-LI Series switches provide Gigabit Ethernet connectivity and high throughput through auto-sensing 10/100/1000 Mbps ports and 10G SFP+ backbone interfaces.

The S5130S-LI series of switches from H3C is represented by the following two models:

S5130S-28S-LI: 24 Ethernet 10/100/1000TX ports, 4 SFP+ ports;

S5130S-52S-LI: 48 Ethernet 10/100/1000TX ports, 4 SFP+ ports.

 

Advanced service capabilities

H3C’s S5130S-LI Series switches support broadband Internet access, providing small and medium-sized businesses with Gigabit access network connections and a 10G backbone interface. They support a wide range of features such as Jumbo frames, 802.1X and MAC authentication, port security, Link Aggregation Control Protocol (LACP), 4K VLANs, 16K MAC table addresses, Blackhole MAC addresses, etc., and offer additional functionality such as Layer 2 and Layer 3 port priority mapping, port mirroring and forwarding, port isolation, access control and port rate limiting, as well as a wide range of IPV6 functions, and other capabilities.

IRF2 intelligent fault-tolerant architecture technology

In S5130S-LI series switches from H3C the technology of intelligent fault-tolerant architecture Intelligent Resilient Framework 2 (IRF2) is implemented. IRF2 provides the following benefits:

Excellent scalability: With IRF2, device aggregation can be plug-and-play by simply adding one or more switches to the stack IRF2 and enabling IRF2 stacking mode on the new device. New devices can be managed through a single shared IP address, allowing software updates to be carried out simultaneously on all devices to reduce network expansion costs.

High reliability: patented IRF2’s 1:N redundancy technology allows each of the slaves in the IRF2 stack to serve as a backup for the master, providing control plane redundancy and data link redundancy, as well as uninterrupted Layer 3 forwarding. This improves reliability and helps avoid interruptions at work and generally improve productivity. If the primary device fails, traffic does not stop.

Load balancing: IRF2 supports aggregation of connections across multiple devices. Connections to upstream and downstream systems can be made through multiple physical links, creating another layer of redundancy and increasing network resource utilization.

Availability: IRF2 technology implemented H3C uses standard Gigabit Ethernet (1GE) or 10 Gigabit Ethernet (10GE) ports and provides bandwidth allocation for service traffic and application access, with intelligent separation of local traffic from traffic to upstream systems. IRF2 rules can be applied not only at the scale of one rack or adjacent racks, but also at the scale of the entire local network.

Comprehensive security policies

H3C’s S5130S-LI series switches feature an innovative multi-authentication feature on a single port, meaning authentication modes for access can differ for different clients. For example, some clients are only capable of MAC address authentication (such as printers), some user nodes use 802.1X authentication, and some user nodes can only authenticate access using a web portal. To flexibly adapt to varying network authentication requirements, the S5130S-LI series switches support multiple authentication on a single port for a unified deployment.

Top threats to network security are ARP attacks and ARP virus hijacking, the S5130S-LI series switches provide a variety of ARP protection mechanisms, such as ARP detection to verify client eligibility, ARP packet authentication, and rate limit setting for ARP to prevent ARP flood attacks targeting device processors.

H3C’s S5130S-LI series switches support End User Authentication (EAD) Admission Domination). When used in conjunction with the iMC (intelligent Management Center) management system, EAD allows you to combine endpoint security policies, such as antivirus and latest updates, with network access control mechanisms and network access rights policies into a single, consistent security system . By validating, isolating, updating, managing, and monitoring endpoint access, EAD enables you to move your network from passive, targeted security to active, end-to-end security, and from isolated to centralized management, enhancing your network’s ability to counter viruses, worms, and other threats. new threats.

Comprehensive quality of service (QoS) management policies

S5130S-LI series switches support packet filtering on layers 2 through 4, as well as traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port numbers, protocol type, and VLAN. They provide flexible port- and queue-based queuing algorithms, including Strict Priority (SP), Weighted Round Robin (WRR), and SP+WRR. The S5130S-LI series switches allow you to control the guaranteed access rate (CAR) with a minimum step of 8 kbps. The devices support port mirroring for incoming and outgoing traffic to monitor packets on specific ports, as well as packet mirroring per monitoring port for network troubleshooting.

Excellent management capabilities< /h2>

H3C’s S5130S-LI series switches provide simplified management with SNMPv1/v2/v3 support, allowing management across platforms such as Open View and iMC. Support for switch management via CLI and Telnet further simplifies tasks. The use of SSH 2.0 encryption provides additional security for the switch management channel.

Extensive Layer 3 routing capabilities

On the S5130S series switches -LI from H3C supports static routing, as well as RIP, RIPng, OSPF V1/V2/V3 protocols.

Additional information

Switching capacity

176 Gbps

Packet forwarding speed

132 million packets/s

Console port

1

Working ports

4 SFP+ ports, 48 ​​10/100/1000Base-T ports

Input voltage range

100 .. 240 V AC current, 50/60 Hz

Power consumption

Max. for AC version current: 44 W, Min. for AC version current: 19W

Working temperature

0 .. 45ºC

Operating humidity

Relative humidity 10% .. 90%, non-condensing

Stacking

IRF2 intelligent fault-tolerant architecture technology

Jumbo frame support

Supported

MAC Address Table

Blackhole MAC Addresses, MAC Address Memorization Limitation

Flow control

802.3x flow control and half-duplex backpressure method

VLANs

MAC-based VLAN, Port-based VLAN (up to 4094 VLANs), QinQ, Voice VLAN

ARP

ARP detection, ARP rate limiting

Neighbor Node Detection (ND)

Supported

Virtual VLAN ports

Supported

DHCP

DHCP Client, DHCP relay, DHCP Server, DHCP snooping, Option82 field support for DHCP

DNS

IPv4 and IPv6, Support static and dynamic DNS service

Routing protocols

RIP/RIPng, OSPFV1/V2/V3, Static routing IPv4/IPv6

Storm Suppression

Storm suppression based on packets per second, Storm suppression based on percentage of port capacity

Mirror duplication

Port Mirroring, Stream Mirroring

Safety

802.1X Protocol, EAD, Hierarchical User Management and Password Protection, HTTPs, MAC Address Authentication, Port Isolation, Source IP Address Spoofing Protection, SSH2.0

Download and update

Downloading and updating software via FTP/TFTP

Management and maintenance

Command Line Interface (CLI) Configuration, Debug Output, DLDP Device Link Discovery Protocol, IMC Network Management System, IRF, NQA, NTP, Remote Maintenance via Telnet, Remote Monitoring (RMON), Signals alarms based on severity, Simple Network Management Protocol (SNMP), System Log, Telnet or Console Port Login, Virtual Cable Test (VCT), Web Based Management

Brand

H3C

The page is under development

This section is under development.

We apologize for the temporary inconvenience

Let call
Please enable JavaScript in your browser to complete this form.